|
FREQUENTLY REPLACED PARTS ON AB DICK PRESSES |
|
CLUTCH |
MODEL # |
COMMENTS |
PART # |
| |
360 |
|
77237 |
|
9800 Series |
|
79871 |
|
CLUTCH
SPRINGS |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
|
73488 |
|
knobs,
CRANKS & HANDLES |
MODEL # |
COMMENTS |
PART # |
| |
350-360 |
Side Guide, Speed Control, Chain Delivery, Small |
11369 |
|
Feed Table, Large |
11392 |
|
Chain Delivery Table Raise, Large |
71406 |
|
375 |
Side Guide, Speed Control, Chain Delivery, Small |
11369 |
|
Feed Table, Large |
80207 |
|
Chain Delivery Table Raise |
71411 |
|
385 |
Side Guide, Speed Control, Chain Delivery, Small |
11369 |
|
Feed Table, Large |
80207 |
|
Chain Delivery Table Raise |
71411 |
|
8805-8820 |
Ink Fountain (Knob) |
17739 |
|
OPERATOR CONTROL LEVER |
17744 |
|
KNOB FOR OPERATOR CONTROL LEVER |
17819 |
|
Speed Control |
11369 |
|
Feed Table |
11392 |
|
Chain Delivery Table Raise |
17714 |
|
8910-8920 |
Chrome Ink Fountain Crank Assy, includes Crank 017788 &
Knob 017739 |
17787 |
|
Feed Table |
17803 |
|
Feed Side Guides, Speed Control, Small |
17595 |
|
Chain Delivery Table Raise |
17714 |
|
9800-9860 |
Chrome Ink Fountain Crank Assy, includes Crank 017788 &
Knob 017739 |
17787 |
|
Feed Side Guides, Speed Control, Small |
17595 |
|
Feed Table |
17803 |
|
Chain Delivery Table Raise 1:1 |
17714 |
|
Chain Delivery 3:1 |
17029 |
|
9865-9870 |
Chrome Ink Fountain Crank Assy, includes Crank 017788 &
Knob 017739 |
17787 |
|
Feed Side Guides, Speed Control, Small |
17595 |
|
Feed Table, was 025134 |
083432 |
|
Chain Delivery Table Raise |
17714 |
|
9880 |
Ink Fountain |
18530 |
|
Side Guides, Feed Table, Small |
17595 |
|
Side Guides, Chain Delivery |
17029 |
|
9890 |
Ink Fountain |
196219 |
|
9880-9890 |
Feed Table |
83432 |
|
Chain Delivery Table Raise |
17714 |
|
9905-9910 |
Chrome Ink Fountain Crank Assy, includes Crank 017788 &
Knob 017739 |
17787 |
|
Feed Table |
17308 |
|
Side Guide, Feed Table, Small |
17595 |
|
Chain Delivery Table Raise |
17714 |
|
9970 |
Chrome Ink Fountain Crank Assy, includes Crank 017788 &
Knob 017739 |
17787 |
|
Feed Table |
25134 |
|
Side Guide, Feed Table |
17595 |
|
Chain Delivery Table Raise |
17714 |
|
C3000-C3500 |
Chain Delivery Table Raise Crank Assy, Includes Crank,
Screw 196906 & Extension Shaft 179573 |
172630 |
|
Gear Adjustment Knob, Also uses Washer 016574 & Inner
Knob 016933 |
17582 |
|
Ink Ratchet Handle, uses 2 |
173210 |
|
Night Latch Handle Assy, Uses 2, Includes Handle 178368 &
Hub 180697, C3000 only |
180703 |
|
Side Guide, Feed Table, also use Ring 36942 & Screw
196244 |
17595 |
|
DRIVE MOTOR PULLEY |
MODEL # |
COMMENTS |
PART # |
| |
9800 Series |
Variable Speed Pulley, 3/4 HP. 50/60HZ. (112" Belt) |
79073 |
|
Variable Speed Pulley, 1/3 HP. 115V. 60HZ. (3/8" Belt) |
13043 |
|
Casting Assembly, Motor Cradle |
16553 |
|
Shaft for Casting Assy |
16550 |
|
Bearings for Casting Assy |
195236 |
|
DRIVE SHAFT & GEAR |
MODEL # |
COMMENTS |
PART # |
| |
9800 Series |
Drive Shaft, QP. QPC and PRO (5/8" Diameter) |
16922 |
|
Gear FOR Drive Shaft, QP. QPC and PRO (5/8" Diameter) |
80191 |
|
Drive Shaft, TD and CD (1/2" Diameter) |
16924 |
|
Gear FOR Drive Shaft, TD and CD (1/2" Diameter) |
72669 |
|
8800 SERIES |
400549 |
Shaft Assy With
Threads |
|
80522 |
Housing |
|
79866 |
Spacer |
|
100185 |
Screw (Use 3) |
|
190179 |
Bearing |
|
100646 |
Retaining Ring |
|
191481 |
Sleeve |
|
14799 |
Washer |
|
196221 |
Nut |
|
375 |
Drive Shaft |
7605 |
|
360 |
Drive Shaft |
72672 |
|
Drive Gear |
72669 |
|
FEED
TABLE LEVER |
MODEL # |
COMMENTS |
PART # |
| |
360 |
Feed Table Release Lever Assy |
80150 |
|
9800 Series |
Feed Table Release Lever Assy |
13827 |
|
FEED TABLE CLAMP & SCREWS |
MODEL # |
COMMENTS |
PART # |
|
|
All AB Dick Presses |
Paper Adjust Clamp |
73385 |
|
Thumb Screw Knob |
73394 |
|
FILTERS (FOR GAST PUMP) |
MODEL # |
COMMENTS |
PART # |
| |
385 |
Pump FILTER |
80743 |
|
All other AB Dick Presses |
Pump/Compressor FILTER |
72855 |
|
GATE SPRING ARM ASSY |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
OS |
16480 |
|
NOS |
16545 |
|
GREASE |
MODEL # |
COMMENTS |
PART # |
| |
ALL |
Lubriplate,
Graphite based, black, 14oz |
174215 |
|
GRIPPER BAR ASSY |
MODEL # |
COMMENTS |
PART # |
| |
350-360, 8805-8820, 8915-8920 |
Gripper Bar Assy |
16646 |
|
375, 9805-9870, 9905-9970 |
Gripper Bar Assy |
16690 |
|
Gripper |
81762 |
|
Drive-lok Pin |
14576 |
|
Cam Follower 1:1 Chain |
16501 |
|
Truck for Cam Follower |
196412 |
|
Retaining Ring for Cam Follower |
1049 |
|
Stud for Cam Follower |
80564 |
|
385, 9880 |
|
81756 |
|
9890 |
|
83352 |
|
HALL EFFECT KIT |
MODEL # |
COMMENTS |
PART # |
|
|
9800 SERIES |
Kit Contains all parts necessary TO convert the original Optical Limit
to the LATER Hall Effect clock/sync Sensor system
Installation Instructions
|
18136 |
|
HAND WHEEL, DISENGAGING |
MODEL # |
COMMENTS |
PART # |
|
|
8900/9900 Series |
BLOCK |
403292 |
|
The following parts have already been installed from SN: 66579 and up. |
BALL PLUNGER |
403293 |
|
LEAD BALL |
403294 |
|
SET SCREW |
102379 |
|
HARDWARE
KIT |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
36 Different Part #s in varying
quantities |
401265 |
|
INK
CLEAN-UP TRAY |
MODEL # |
COMMENTS |
PART # |
| |
3302 |
|
534052500 |
|
INK
FOUNTAIN BLADE |
MODEL # |
COMMENTS |
PART # |
| |
3985, 3302 |
|
534051070 |
|
INK
FOUNTAIN KEYS |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
|
73512 |
|
INK
FOUNTAIN SEALS |
MODEL # |
COMMENTS |
PART # |
| |
|
Rubber - Pack of 2 |
18360 |
|
INK SYSTEM & GEARS |
MODEL # |
COMMENTS |
PART # |
| |
9800 SERIES |
Night Latch Shaft |
17619 |
|
Shaft & Gear Assy/Lower Oscillator |
7557 |
|
Nylon Lower Oscillator Roller |
7559 |
|
Bushing |
73029 (2) |
|
Nylon Idler Gear Assy |
76218 |
|
Gear/Night Latch |
76386 |
|
Bushing |
1497 (2) |
|
Stud/Idle Gear |
195385 |
|
Bearing Bracket RH |
78639 |
|
Geared Ink Distributor Roller |
7549 |
|
Retaining Ring #25 |
1047 (2) |
|
Bearing |
84421 (2) |
|
Spring #5 |
72625 |
|
KOMPAC
SEALS |
MODEL # |
COMMENTS |
PART # |
| |
All Presses |
Pack of 2 |
92370 |
|
10 Packs of 2 |
92180 |
|
NIGHT
LATCH SHAFT |
MODEL # |
COMMENTS |
PART # |
| |
9800 Series |
Night Latch Shaft (Form Roller Separator) |
17619 |
|
PAPER
WEIGHT BARS |
MODEL # |
COMMENTS |
PART # |
| |
350-360, 8805-8820 |
Standard Weight Bar |
78429 |
|
Lightweight Bar |
74652 |
|
385 |
Standard Weight Bar |
80703 |
|
375, 9805-9860 |
Standard Weight Bar |
7661 |
|
Lightweight Bar |
7809 |
|
9905-9920 |
Lightweight Bar |
7809 |
|
PAPER
FEED BOARDS |
MODEL # |
COMMENTS |
PART # |
| |
All |
For 8.5 x 11" and 8.5 x 14" Paper |
94449 |
|
For 11 x 17" Paper |
94428 |
|
For 13.5 x 17 Paper |
180849 |
|
PAPER
FEED SENSOR |
MODEL # |
COMMENTS |
PART # |
|
|
9805-9870, 9970 |
Genuine AB Dick |
9532 |
|
Press Partner's Electro-Magnetic |
EXO994 |
|
PUMP/COMPRESSOR |
MODEL # |
COMMENTS |
PART # |
| |
AB Dick Presses-Oil-less Pump |
Oil-less Gast Pump, replaced 072821 |
402301 |
|
Vane for Gast Pump |
402300 |
|
PUMP FILTER |
MODEL # |
COMMENTS |
PART # |
| |
AB Dick Presses-Oil |
Presses that have Gast pump with 2 Oil Jars |
72855 |
|
Filter Jar |
72852 |
|
Vane for Gast Pump with Oil Jars |
72919 |
|
REGISTER
PINS |
MODEL # |
COMMENTS |
PART # |
| |
3980, 3985, 3995 |
Pin/Round High |
511020150 |
|
Pin/Oblong High |
511020160 |
|
Pin/Round Low |
511020170 |
|
Pin/Oblong Low |
511020180 |
|
REGISTER PUNCH ASSY |
MODEL # |
COMMENTS |
PART # |
| |
3980, 3985, 3995 |
|
5110100104 |
|
ROLLERS & ROLLER KITS |
MODEL # |
COMMENTS |
PART # |
| |
See Roller Section |
Genuine AB Dick,
Syn-Tac,
Lith-O-Roll,
Crestline,
Kompac,
T-51 |
|
|
SHEET
SEPARATORS |
MODEL # |
COMMENTS |
PART # |
| |
All Ryobi/Itek Presses |
Pack/10 New Style |
5290324511 |
|
Century 3000/3500 |
|
178965 |
|
Century 3500S |
Original Style (use 2 each) curled lip, mirror image |
187594 and
187593 |
|
New Style (use 4), straight, no lip |
187353 |
|
SPEED CONTROL CABLE |
MODEL # |
COMMENTS |
PART # |
| |
8805-8820, 8905-8920, 9805-9870 |
|
401995 |
|
SUCKER
FEET |
MODEL # |
COMMENTS |
PART # |
| |
All Ryobi/Itek Presses |
Pack 100 |
543033312 |
|
All AB Dick Except Century |
Box 100 |
84248 |
|
C3000/3500 |
Feed Sucker Cup (pack 12) |
178932 |
|
C3500S |
Pink -or- |
187653 |
|
White, Lightweight |
187654 |
|
SUCKER
TUBES |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
Black Plastic |
403214 |
|
SUPPORT ARMS |
MODEL # |
COMMENTS |
PART # |
| |
9800 SERIES |
LINK |
80911 (2) |
|
PIVOT |
72394 (2) |
|
SUPPORT ARM |
83313 (2) |
|
PIVOT STUD |
17077 (2) |
|
SCREW |
195721 (2) |
|
NUT |
1834 (2) |
|
SWITCHES, SOLENOIDS ETC. |
MODEL # |
COMMENTS |
PART # |
|
Switches, Solenoids, Circuit Breakers, Relays, Fuses |
350, 360 |
Drive & Air (vacuum pump) – 2 position - Four terminal
screws (press has no safety covers); toggle switch |
55238 |
|
Air - 2 position (without auto position), (6) ¼" spade
terminals (like prongs); toggle switch |
251354 |
|
Drive - 3 position (with auto position), (3) ¼" spade
terminals; toggle switch |
250865 |
|
Air - 3 position, (3) ¼" spade terminals; toggle
switch |
250999 |
|
Air, Micro Switch, feed lever actuated |
250997 |
|
Safety cover interlock, Magnetic reed |
076864 |
|
Chain Delivery interlock, Roller actuator |
060734 |
|
Drive relay, original design, open contacts |
Obsolete |
|
Drive relay, new design, encased contacts, should be
replaced by technician |
192757 |
|
375 |
Drive - 3 position, (3) ¼” spade terminals |
250865 |
|
Air - 3 position, (3) ¼" spade terminals |
250999 |
|
Safety cover interlock, magnetic reed |
76864 |
|
Drive Relay |
252477 |
|
385, 385PRO |
Drive and air, (3) solder lugs (like prongs) |
191286 |
|
Chain Delivery interlock, Roller actuator |
60734 |
|
Drive Relay (2 each) |
082085 |
|
Fuse, 8A 250V, 4 each |
080838 |
|
Fuse, ¼ A slow-blow, 2 each |
250012 |
|
8805, 8810, 8815, 8820 |
Drive - 3 Position, (3) ¼" spade terminals; toggle switch |
250865 |
|
Air, ¼" terminals |
253238 |
|
Safety Covers, Chain Delivery, (3) 3/16" terminals |
250137 |
|
Safety Cover Interlock, Magnetic Reed |
76864 |
|
Safety Relay |
252476 |
|
Drive Relay 8805/8810 |
253183 |
|
Fuse 8805-8810, 250v, ½ amp |
200163 |
|
Relay 8815/8820, Drive 2 ea Stacked or |
252477 |
|
Relay 8815/8820, Side-by-side on mounting board |
253356 |
|
Circuit Breaker 8815/8820, Drive & Pump, 10amp, 2 ea |
250051 |
|
8915-8920 |
On/Off Main Power, Twist Switch, ¼" quick-connect
terminals, 2½" square face |
253952 |
|
Drive, Air, Illuminated Rocker ¼" terminals |
253953 |
|
Drive, Start, Illuminated Push-button, milk-white, ¼"
terminals |
253365 |
|
Emergency Stop, (2) quick-connect terminals |
253475 |
|
All Safety Covers, Button, plunger on top, (2) ¼"
terminals |
253211 |
|
9815, 9820 |
Membrane, keypad, drive, air, etc |
017716 |
|
Emergency stop, (2) ¼" quick-connect terminals |
253853 |
|
Safety covers, CD, cam activated |
252439 |
|
Safety, Magnetic reed |
076864 |
|
Main power, circuit breaker, white rocker |
252819 |
|
Solenoid, feed/impression |
252824 |
|
9805, 9810 |
Main power (on Switch Box), toggle |
253005 |
|
Air/Vacuum, Feed, (2) ¼"spade terminals |
253238 |
|
Drive - 3 position, (3) ¼" spade terminals |
250865 |
|
Safety cover, Magnetic reed |
76864 |
|
Safety cover, CD, cam activated micro switch |
250137 |
|
Emergency stop, (2) ¼” quick-connect terminals |
253853 |
|
For machines with electronic counter only: |
|
|
Proof, Auxiliary feed, CD, Momentary, on OS cover |
253002 |
|
Counter, Solid state/Hall effect |
253218 |
|
Membrane, keypad, counter, etc |
401951 |
|
Doubles detector, plunger actuator, (3) pin connectors
|
253025 |
|
Feed Solenoid |
401969 |
|
9835, 9840, 9850 |
Membrane, keypad, drive, air, etc |
017811 |
|
Main Power Circuit Breaker, white rocker |
252819 |
|
Doubles Detector, plunger actuator, (3) pin connectors |
253025 |
|
Auxiliary Feed, Proof, on OS Chain Delivery, uses 2 |
253002 |
|
Safety Cover, Magnetic reed |
76864 |
|
Safety Cover, CD, (3) 3/16" Quick-Connect Terminals |
252439 |
|
Feed Table Limit, (2) hooks for solder connection on
bottom, push |
250806 |
|
Emergency Stop, (2) ¼" quick-connect terminals |
253853 |
|
Big Red Button |
22843 |
|
Feed & Impression Solenoid |
252824 |
|
Drive Relay, uses 2 |
253857 |
|
Pump Relay, uses 1 |
252829 |
|
Drive Relay, 2nd generation mounted on board side by
side, use 2 |
253856 |
|
Doubles Detector |
253025 |
|
9865, 9869 |
Main on/off switch, toggle |
253005 |
|
Power supply, toggle |
253477 |
|
Drive, toggle |
253370 |
|
Inching, 7/64" terminals |
253472 |
|
Doubles Detector, Plunger actuator, (3) pin connectors |
253025 |
|
Manual override assy |
025357 |
|
Manual print control assy |
025358 |
|
Speed control assy |
025525 |
|
Etcher control assy |
025370 |
|
Guard reset, 7/64" terminals |
253551 |
|
Membrane, keypad, start, stop, feed, etc |
025138 |
|
Guard, ink-aquamatic, 9865 tray delivery only |
253545 |
|
9870 |
Main on/off, toggle |
253005 |
|
Impression-On Solenoid 115vac |
253375 |
|
Feed Solenoid |
253578 |
|
Membrane, keypad, start, stop, feed, etc |
022753 |
|
Speed, with 4" leads |
022797 |
|
Guard reset, 7/64" terminals |
253551 |
|
Safety Cover, blanket cylinder, roller actuator, (3)
3/16" terminals |
253545 |
|
Safety cover, ink & aquamatic, plunger actuator, (2)
6.3mm quick–connect terminals |
253822 |
|
Safety cover, chain delivery, (3) 3/16" quick-connect
terminals |
252439 |
|
Emergency stop, (2) quick-connect terminals |
253475 |
|
Doubles detector, plunger actuator, (3) pin connectors |
253025 |
|
Auxiliary feed & proof, On OS chain delivery cover |
253002 |
|
Inching, push button, 7/64" connectors |
253472 |
|
Limit switch, chain delivery |
025366 |
|
Feed table limit (2) hook solder connection, push
actuator |
250806 |
|
Feed Solenoid 110v |
253578 |
|
9870D Dampener Only |
On/Off, DPDT rocker |
253511 |
|
Safety sequence, plunger activator, (2) 6.3mm
quick-connect terminals, cam actuated |
253822 |
|
Relay |
253467 |
|
Circuit breaker |
253618 |
|
9880 |
Power (start), (2) ¼" quick-connect terminals |
253365 |
|
Forward/reverse and inch/run, 3- position, ¼"
quick-connect terminals |
253364 |
|
Inching, push-button |
083695 |
|
Emergency stop, (2) ¼" quick-connect terminals |
253853 |
|
Safety cover interlock, magnetic reed |
076864 |
|
9890 |
On/off, main power, twist switch, ¼" quick-connect
terminals, 2½" square face |
253952 |
|
Power (start), (2) ¼" quick-connect terminals |
253365 |
|
Forward/reverse & pump, lighted rocker, ¼" quick-connect
terminals |
253953 |
|
Run/off, rocker switch, ¼" terminals |
253954 |
|
Inching, push-button, with wires and connect |
400044 |
|
Emergency stop, (2) quick-connect terminals |
253475 |
|
Cover interlock, plunger activator, (2) 6.3mm
quick-connect terminals |
253822 |
|
Latch, lever/button actuator, (3) quick-connect terminals
|
253965 |
|
Count, lever/button actuator, (2) 3/16" quick-connect
terminals |
253982 |
|
9905, 9910 |
Membrane, keypad, counter, etc |
401951 |
|
Pump/drive, rocker, lighted. ¼" quick-connect terminals |
253953 |
|
Safety guards: ink aquamatic, master, blanket, chain
delivery, button actuator, 6.3mm quick connect terminals, use 2 each |
253211 |
|
Disengaging hand wheel, lever/button actuator, 6.3mm
quick-connect terminals, 2 each |
254315 |
|
Auxiliary feed, push-button, pin connectors, 3 each |
253002 |
|
Doubles detector, plunger actuator, pin connectors, 3ea
|
253025 |
|
Emergency stop, (2) quick-connect terminals |
253475 |
|
Counter lever, lever/button actuator, plug-in solid state
switch/Hall effect |
253218 |
|
Start, push-button, 4-prong, momentary (on control panel) |
253365 |
|
9970 |
Membrane, drive, pump, stop, counter, etc |
022753 |
|
Auxiliary start switch, push-button with wire &
connectors |
402630 |
|
Speed, push-button with wire & connectors |
402637 |
|
Guard Reset, push-button, momentary, lighted, 7/64"
quick-connect terminals |
253551 |
|
Safety guards, blanket and master, plunger actuator,
6.3mm quick-connect terminals, 2 each |
253822 |
|
Safety guard, ink, aquamatic, chain delivery, plunger
actuator, 6.3mm quick-connect terminals, 2 each |
253211 |
|
Disengaging hand wheel, lever/button actuator, 6.3mm
quick-connect terminals, 2 each |
254315 |
|
Emergency stop, (2) quick-connect terminals |
253475 |
|
Doubles detector, plunger actuator, pin connectors 3 each |
253025 |
|
TABLE RAISE |
MODEL # |
COMMENTS |
PART # |
|
|
9905, 9910 |
Miter & Worm
Assy
(REPLACED 80334) |
076607
|
NOTE: On May 30, 2000, beginning with
Serial Number 70564, the Table Raise Mechanism for the 9905/9910 series
was upgraded. Essentially, the "TC" style parts are now being used on
all machines.
The parts can also be used for machines prior to Serial Number 70654,
but only if both the table raising shaft assembly and the miter & worm
gear assembly are replaced at the same time. |
Worm Gear Assy only
(REPLACED 72636)
Note: The parts book diagram & parts list are misleading - this is
a Sub-assembly and it is available separately |
72569 |
|
Table Raise Shaft Assy |
402466 |
|
VACUUM
PLUG/CAP |
MODEL # |
COMMENTS |
PART # |
|
|
All AB Dick Presses |
|
13010 |
|
WATER FOUNTAIN BOTTLE & CAP |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
Flat Quart Bottle |
12141 |
|
Round Quart Bottle |
80534 |
|
Bottle Cap & Valve Assy |
17747 |
|
Syn-Tac Bottle & Cap Assy |
35049 |
|
C3000 & C3500 |
Round Bottle |
22524 |
|
Kompac Bottle |
Round Quart |
92771 |
|
Kompac Cap |
|
92760 |
|
Kompac Bottle Low Profile |
Flat/Low Profile |
92777 |
|
Kompac Cap Low Profile |
Low Profile Cap |
92780 |
|
WATER FOUNTAIN DRAIN HOSE |
MODEL # |
COMMENTS |
PART # |
| |
All AB Dick Presses |
Pack 4 |
191586 |
|
C3000, C3500, C3500S |
6" |
180440 |
|
WATER FOUNTAIN SHIELDS |
MODEL # |
COMMENTS |
PART # |
| |
AB Dick Presses with Super Aquamatic WATER SYSTEM |
Ceramic Shields for Water Fountain Roller Pack 4 |
80979 |
|
Flat Washer Pack 4 |
195086 |
|
Spring Washer Pack 4 |
195087 |
|
Stainless Steel Clip Pack 4 |
101870 |
SYN-TAC
ROLLERS FOR RYOBI 750 SERIES
